OPAWZ Product Instructions

DIRECTIONS

• Shampoo and blow-dry first if the dog's coat is dirty and oily.
• Shake well before opening.
• Apply onto desired coat area and leave it on for 20 minutes (For the Loyal Brown and Vital Copper, please let the color sit on the hair for at least 40 minutes) .

• Rinse and dry after.

NOTE

• Be sure to stir well with a brush before use.
• For coloring limited areas, such as ears or tails, you may apply directly to dry fur. Results may vary depending on application strength and individual pet’s coat.
• Coloring results may vary with coat type and breed.
• Conditioner may inhibit colors from adhering properly. Please do not use any conditioner or other brands' dyes (as they may contain conditioner ingredients) prior to using OPAWZ dye.

CAUTION

• Not recommended for use on pets under 6 months.
• Not recommended for use on cats.
• Do not use on pets with sensitive, irritated, or damaged skin.
• Do not allow pets to lick.
• Avoid contact with eyes and mouth. If it happens, rinse with a large amount of water for 15 minutes.
• If any allergic reactions happen during dyeing, discontinue process immediately and consult a veterinarian. Allergy test on the skin is recommended 48 hours prior to application if the pet is being colored for the first time.

• Safe to use on cats, horses, and other animals that can be bathed, such as rats and guinea pigs.
• Best suited for white-haired coats.
• Colors will last longer for fine and soft-haired coat type pets such as Bichon and Poodle. Color will typically last around 12 washes.
• For wire-haired coat type, colors will wash away more quickly.
• Final color result will vary depending upon the hair color for light brown & light gray coats.
• Not suggested　for use on the dark-haired coats.

USAGE

• Ready to use.
• Shampoo and blow-dry firstly if pets' coat is dirty and oily without using conditioner.
• Apply evenly on the desired coat area and leave it on for 20 minutes.
• Rinse until water runs clear and dry after.

CAUTION

• Do not use on pets that have sensitive, irritated or damaged skin.
• Do not allow the pet to lick.
• Do not contact with eyes and mouth. If it happens, rinse immediately with plenty of water for 15 minutes.
• If an allergic reaction happens, discontinue use immediately and consult a veterinarian.

DIRECTIONS

• Rinse hair, then apply a generous amount of Funky Color Shampoo evenly from roots to ends.
• Lather well to make sure the product is saturated throughout the hair to ensure a more even application.
• Leave in for 10-30 minutes.
• Rinse with lukewarm water and finish up with conditioner.
• Color will last for 3-8 washes. Time of hold may vary based on coat texture.

The longer the color shampoo stays on, the brighter the color result!

CAUTION

• Gloves are recommended to avoid color staining on hands.
• If the hair is too greasy, please use OPAWZ Deep Cleanse Shampoo to wash first.
• To get a better result, do not use any conditioners or treatment products before using Funky Color Shampoo. If used it can prevent color from adhereing properly.
• In case of contact with eyes, rinse them immediately.

PRE-TEST

• Always do a pre-test 48 hours prior to application.
• Do not bathe pet in advance.
• Double-check to make sure that there is no damage, redness, and/or swelling on the skin of the areas that will be lightened.
• Lightening Cream and Developer at a ratio of 1:2 and mix well.
• Apply test patch to areas, making sure to touch the hair roots and let the mixture sit for 30 minutes (do not touch the roots when doing the actual lightening).
• If the pet does not experience any discomfort, the normal lightening process can proceed.

USAGE

• Pet does not require bathing before application.
• Comb hair well (avoid using combs with sharp needle tips to avoid damaging hair) and check there is no damage, redness, and swelling on the skin on all areas that need to be dyed.
• Mix Lightening Cream and Developer thoroughly at a ratio of 1:2
• apply evenly on the area(s)
• keep 1/2 inch (1 cm) away from the roots.
• Leave at room temperature for about 25 minutes.
• the mixture off with room temperature water (~25℃), apply Deep Cleanse Shampoo and lather well. Rinse clean and dry.

CAUTION

• Cannot be used for pets that have damaged, inflamed, or sensitive skin. Be especially careful to not let product touch the skin on ears, tail, or spine, keep 1/2 inch (1 cm) away from the roots - these areas secrete more oils and may be prone to develop skin problems if not well maintained. The spine may also be more sensitive due to frequent exposure to high temperatures from the use of clippers. 
• Avoid the eyes and mouth. If it happens, rinse immediately with plenty of water for 15 minutes. The product contains hydrogen peroxide, and pets may vomit if swallowed by mistake. Veterinarians often use hydrogen peroxide to induce vomiting on pets who swallow by mistake.
• Do not use foil wrap or apply heat. Observe the pet’s reactions during use. If there is scratching or other signs of discomfort, stop using immediately, and rinse with water at about 25℃. Excessive water temperature may cause pets to feel discomfort with skin. If using products around the face, covering with plastic wrap is recommended to avoid getting the products into the eyes and mouth.
• Do not apply color dye right after lightening. The suggested interval between lightening and coloring 1-2 weeks. The possible residual grease/oil from lightening will affect the coloring result. This also gives the pet more time to rest.
• Not recommended for use on large areas. Not recommended for use multiple times a year.

DIRECTIONS

• Apply directly to the pet’s coat. You can also apply with a brush for more detailed designs.
• The repeated application creates a fuller and more vibrant result.
• Avoid using around eyes and mouth.
• If an allergic reaction occurs, discontinue use immediately and consult a veterinarian.

NOTE

• Some hairs are more absorbent and therefore the color can last longer.

TUTORIAL

DIRECTIONS

• Apply directly on pet’s coat.
• Washes off in 1-3 washes.

TUTORIAL

CAUTION

• Close blow pen when it not used, for the purpose of extending cartridge use.
• Do not contact the pet’s eyes and mouth.

Tutorial

AIRBRUSH DIRECTIONS

• Plug in the mini air compressor and the red POWER light will be on.
• Press the MODE Button, when the green light of MAX speed is on, the airbrush is ready for use.
• To adjust the airbrush speed by pressing the MODE button.
• Fill the fluid cup and slide the trigger to spray.
• Clean the fluid cup and the airbrush thoroughly every time you switch colors and after use.
• Turn it off by pressing the Power Button again, and then unplug the device.

CAUTION

• The compressor should be stored and used in cool, dry and well-ventilated places.
• Keep out of the reach of children.
• Requires 0-40° Celsius ambient temperature to store and use. Avoid exposure to sunlight.
• Keep the airbrush in the original holder when not use.

TEMP-INK DIRECTIONS

• Open and drop into the airbrush machine directly.
• Do not touch water after using to avoid color fade.
• Cover lid after use to ensure the best effect for the next use.

CAUTION

• Do not contact with pet's eyes or mouth. If it happens, rinse thoroughly with water.
• Keep out of reach of children.

DIRECTIONS

• Place on fingers or brushes and apply evenly to dry coat.
• Comb through and blow dry with warm air.

CAUTION

• Avoid using around eyes and mouth.
• If an allergic reaction occurs, discontinue use immediately and consult a veterinarian.

TUTORIAL

How to assemble model dog

How to put on the wig on the model dog

Tips on styling model dog

Getting started with OPAWZ model dog head